A facility has spent decades developing the ideal batch mixing process. But when production scales up, the limitations of standard approaches become more apparent. Inline mixing technology is a game-changer for how materials are combined in the production process, offering extensive new standards for consistency, efficiency, and flexibility. While traditional methods mix everything in a batch and send it downstream, inline systems blend components as they flow continuously.
This may sound simple enough, but the reality is that inline mixing operates on principles greater than most engineers are initially aware of. This is more than just one piece of equipment instead of another. This is a new way to consider the mixing process as part of the larger situation and what becomes possible when it all happens simultaneously rather than in batch.
How Inline Mixing Works
At its core, inline mixers work by combining two or more streams at a specific junction where they mix before proceeding downstream. Some systems include moving pieces, rotating impellers or high-shear rotors that apply mixing forces to the assembly. Others utilize static mixers, engineered obstacles inside a pipe that cut and recombine flow to achieve homogeneity without moving parts.
The former works better for those applications with aggressive mixing needs or where the different viscosities create a challenge, and the latter utilizes lower viscosity fluids and static mixers essentially require no maintenance since there are no moving parts to break down. Both share a central benefit of continuous processing in real-time; thus, the entire downstream dynamic changes.
If That Sounds Right, Consider This
Here’s what inline mixing offers that batch mixing cannot: every unit of production receives exactly the same treatment. With batch mixing, what’s near the sides of the tank experiences a different shear force than what’s in the middle; the first gallon drawn out of a batch tank is slightly different than the last gallon (even if still within spec).
With inline systems, everyone gets exactly what’s needed. Everyone gets the same residence time. Everyone gets the same mixing energy applied at that exact junction, just not all at once in an arbitrary way that’s needed in large batch systems for power to apply to all sizes/volumes. Thus, when it comes to specialty products where major specifications matter, pharmaceuticals, specialty chemicals, food/beverage, and inline running reduces rejected batches and waste.
In addition, when there’s no batch to run all, errors and deviations occur in real-time rather than when a whole batch is completed. You can uncover an error in minutes instead of after hours.
Space and Capital Cost
Batch systems are massive. They take up tons of square footage and space is limited in all facilities today. Inline systems take up minimal square footage since there’s no major holding area that needs cleaning; engineers develop production lines that make sense in terms of composition and inline mixes help facilitate options without expansion.
Batch systems require major investment and comparison to like systems outside production are tricky. A complicated inline mixer will cost more than a quality basic batch tank, but installation costs, spin-off opportunity for free space on the floor and supportive infrastructure create greater value with inline systems. Static mixers, in particular, require no motors/seals/bearings to quote/install, so there’s even less cost.
Moreover, inline systems can pay for themselves faster than expected through lack of cycle time. You’re not waiting for products to fill a tank or mix for 10 minutes, drain it and clean it. You’re moving product through at a consistent clip. For many high-volume situations, time is enough.
Energy Efficiency
Energy required for batch systems consists of pumping thousands of gallons through each opportunity at the tank for recirculation until everything is the same (30 minutes or more). This doesn’t seem like an overwhelming amount of energy but on repeat 100s of times a month, it adds up.
Inline systems only use applying energy into incoming materials. There’s no recirculation. There’s no heating or cooling for stationary volumes. There’s nothing underway waiting for the next stage down the line; instead, motors or static elements apply value as they get materials ready for success in anticipated stages.
With rising energy costs today, this becomes more powerful for those in 24/7 situations compared to more reserved facilities that spin-off (running at high costs versus real operating expenses).
Reduced Changeover Downtime
Changeover downtime exists between any product formulation; it happens with batch systems as they drain tanks/clean all internals/rip out test runs to ensure clarity before moving to another product. That intermediate volume sitting in the tanks from one mixing phase to a next also creates expensive product waste between mixes.
Inline systems inherently hold less volume as in any given moment only small batches are running through; it’s measured in gallons, not hundreds, what has to be purged during transition. Cleaning takes less time, less surface area/less internals, and some inline systems can be CIP with automated options that take minutes instead of hours.
For facilities producing multiple products and on-size batches, the time savings are monumental. The flexibility to turn on a dime without extended downtime creates novel opportunity to adapt day-to-day based on need.
Maintenance and Reliability
Batch tanks have large agitators with seals that eventually leak/bearings burn out/drive systems that fail and need rebuilding from time to time. While not significant maintenance required, it’s required consistently across all mixer systems.
Static mixers have almost no maintenance required; they aren’t particles inside pipes, their components with no active parts exist inside dynamic inline mixers, but there’s smaller scale and simpler design which renders fewer operational matters versus massive batch tank agitators.
Less maintenance means fewer failed states; thus increased uptime and lower costs over time with operational low expectations.
Things to Consider
There’s no learning curve but it’s not always as easy as switching equipment to inline mixing from batch mixing all at once; you must evaluate where it’s appropriate down the line where flow rates are kept static and downstream machines can run virtually at continuous feed and not discharge.
Some facilities combine single-use construction with inline mixing for new products while sticking with batch systems for old products while acquiring confidence; this is an overall new way to look at the process without hesitation as long as you don’t think about a batch size but rather volume-residence-time-agitation speed.
With modern manufacturing moving increasingly from batch operations to continuous processes, it’s clear that inline mixing technologies provide real benefits that render opportunities around consistency that wouldn’t make sense otherwise.
Facilities serious about strengthening production capabilities can no longer afford to ignore what’s best for them in terms of such benefits. It’s better than simply what’s possible within current capacity.
Read Next: