As a building owner or manager, how often do you second guess yourself in regard to compliance? Most facilities are more compliant than owners and managers realize; however, few systems are more essential to functionality than those buried behind walls, located underground, or otherwise operating in the shadows.
While most managers think fire safety consists of extinguishers and working alarms, it’s truly about mitigating the chance you’ll ever have to use either. Thus, the systems necessary to ensure that the firefighters who respond to your emergency can actually do their job trump those obvious aspects that face the public and are often on display.
What Do Inspectors Actually Look For?
Are fire inspections random? Absolutely not. Based on the height of the building, as well as occupancy type and other local regulations, inspectors use checklists to ensure your building can maintain emergency operations from an inside perspective. In fact, for taller buildings, one of the first systems they’ll check is your standby water supply.
Why? Because dry riser systems are mandated for buildings exceeding a certain height. Fire engines cannot always pump water up high enough to service top floors; thus, specific systems are installed with dedicated inlets at the ground and valves on every floor. Dry riser cabinets are crucial, too.
Some building managers think it’s enough to have a dry riser system but fail to keep dry riser cabinets in good condition; without proper housing, inlet and outlet connections can corrode, deteriorate, or be damaged beyond use as well as compounded by accessibility issues.
For example, there are dry riser cabinets designed so that the inlet connection and outlet valves can be operated by a firefighter immediately upon arrival, but only if there’s no rust blocking them in or vandalism that’s made them inaccessible. If your dry riser has inlet connections that can no longer be used due to paint over them, or an outlet valve that’s so corroded that it will snap off upon trying to twist it open, the system is useless.
The Height You Didn’t Realize Was a Threshold
Most people don’t realize that compliance requirements change dramatically after certain levels have been reached. You could have a quaint three-story building while you have completely different expectations for a six-story one; then the requirements jump again for an 18-meter structure.
Where does this come from? Developers design the buildings one way; then, at some point during completion, they realize they have a couple extra feet of materials planned – either an entire story or changed ceiling heights, and they inadvertently cross a threshold without realizing it.
Dry riser installations mean pipe work running vertically through the structure and properly placed cabinets at entry points and outlet connections on each floor. Without consideration at the development stage for where specific piping will go, what’s optimal for installation from the outside can be detrimental to retrofitting later.
Consider how expensive it would be to have to pass dry riser pipes through finished walls and then above ceilings as opposed to pre-ordering what could go into place beforehand.
Maintenance Mistakes You Never Knew About
Installing compliant systems is one thing, maintaining them is another that ensures that many buildings fail inspections. Dry risers require testing each year to ascertain that they’ve retained pressure and that all valves work appropriately. While an owner or manager might assume they can test something themselves, they need someone qualified with testing equipment who knows how to pressure-test systems.
This requires them to test each valve, they need to see that they open and close smoothly; they need to ascertain that the doors of cabinets that house these contents are not so corroded that they’re stuck shut. Even more interesting is what happens if you’ve been pressure testing these for years and the inspector fails you anyway, because everyone fails if someone can verbally say they’ve done it.
Inspectors want documented proof. It starts with records dating back to your first inspection of this system; it goes annual then further beyond; if you can’t document what you’ve done when told you had to do something on your own accord, then you never did it. Same goes for access – your dry riser cabinet should be accessible through no landscaping obstruction by temporary storage or parked cars; access must be instant – not taking a minute or longer to find a designated space.
Little Ways Owners Fail Compliance
Some reasons people fail compliance are almost pedestrian until they realize how serious they actually are. For example, signage is crucial for fire safety compliance and is one way people get cited for noncompliance – no matter how many times it’s told ahead of time.
For example, those red “Dry Riser” signs on the side of buildings, or anywhere else, are there so first responders know where to connect their hoses should smoke be raging so high they can’t see anything but darkness. Yes, some people might think it’s tacky, but it’s like school districts putting up speed zones in front of schools, they don’t care why you’re there, they care about your kids being safe.
The same thing goes for painted-over valve handles, how many times has a building been painted, and someone simply didn’t cover the valve properly? And yet in an emergency, not rendering a valve operable renders all systems useless at the worst possible time.
Cabinet damage is another way people fail compliance immediately upon inspection, a broken door which lets humidity in and waters down everything else indicates water hasn’t gotten in there, it implies some negligence on behalf of either maintenance personnel or unfortunate onlookers who should have been more careful.
How Height Relates to Systems
The reason why height matters where compliance is concerned is because from where fire trucks can operate with hoses, beyond that they need assistance. It’s clear that when hoses reach a certain height mandated by piping, things need to change, making an internal water supply highly necessary once firefighters cannot exceed dimensions.
In general jurisdictions require dry risers for buildings exceeding four or five stories, and every area has its regulations; there are various local laws depending on your precise square footage. One building can be compliant across town but fail if transported three miles away.
This complicates mixed-use structures even more; for example, retail on the bottom floors with residential floors above must have different sprinklers instead of dry riser entry points; ground-level commercial space might need something different than upper residential levels.
Documentation You Forget Until The Day of Inspection
What’s most surprising as fire code compliance is the reality that without equipment, fire code compliance is non-existent, but with documentation it flourishes. When was the last time anyone documented anything besides developers?
Inspectors want commissioning reports which stipulate when things were tested originally; they want annual testing reports; they want maintenance reports noting any problems were resolved within a specified timeframe, timestamped correspondence showing detailed notes and public copies readily available at a moment’s notice.
If something gets lost in the mail, it doesn’t exist. Buildings who fail inspections often do have functional equipment but lack paperwork.
The dry riser worked ten years ago but hasn’t been tested since; its cabinet held up for ten years but got loose hinges. Unless you can prove it with honesty over showing a single fault – in reality, from a compliance standpoint, it didn’t happen.
Planning Saves Money
Most buildings that make fire safety compliance easy are buildings where someone thought about construction access once the building was designed either for dry riser system or whatever shielding needed to occur either gave inexpensive ways or there was no speculated resilience planned.
Cheap cabinets require enforcement; thin metal rusts quicker than you’d like it where basic locks get forced open by basic openings; if there’s insufficient weather sealing on interior elements such as nozzles or valves, spending upfront at installation for quality protection means emergency repairs, and ultimately inspections down the line, for years down the line will come easier.
Placement also means you’re going to ensure that something will go there ideally after centering not at ground level but floor level so future landscaping doesn’t get in the way this approach means looking at how people are going to actually access it, what works best inside construction?
The Bottom Line About Compliance
Fire safety compliance is not a checkbox. It’s ensuring that systems, and systems outside of comfortable everyday realities, work seamlessly as they’re supposed to when needed down the road with proper maintenance unless people tell you otherwise.
Ultimately, it’s important to understand locations and machinations of how systems worked best instead of what’s easiest by pure eyesight appeal or what’s directed by numbers alone.
Most policies fail because equipment isn’t there, it exists fine but paperwork isn’t completed. But avoiding fire safety compliance means mortgaging failure, and who wants added waste when compliance is easier rectified?
Read Next: