No Internet Secured in Windows 10 – [Solved] 

Are you getting a “No Internet secured” message? Get rid of this wireless issue by following these steps, and you’ll be back online.

Wireless network difficulties within Windows 10 are usually straightforward to resolve. However, occasionally, you may encounter a “No Internet secured” message that pops up in the tray of your system.

A wireless configuration or connection issue may be responsible for this error. The error is not difficult to fix, but it can be frustrating. Here are eight things you can try to fix the “No Internet Secured” Microsoft Windows 10 error.

What Does No Internet secured Mean?

You may have noticed the error message appear within the System Tray area of the Windows 10 taskbar. Perhaps as a message. But what exactly does “No Internet Secured” really means?

A rather vague error message on Windows 10, the error usually means that the internet connection you are using is down. However, it could occur even when you are connected.

Confused? It’s not a surprise.

The problem is that it seems to be intentionally unclear. If your computer is no longer connected to Internet connectivity, the fact that it’s secured or not is irrelevant.

Although it’s possible to use it across every Windows 10 device, it is most common on Microsoft Surface devices. If your PC uses the same driver or network card, you may see it appear regardless. Other factors can also trigger the display that “No Internet, secured” error.

Also Read: 7 Major Advantages of the Internet Today

Fixing the “No Internet secured” Error

There are a variety of solutions available to this undefined error. The problem is that they all depend on the configuration of your computer and the network adapter. So, not all solutions are going to be effective. But, we’ve listed the most likely ones first, then go through the suggestions in the order listed.

This list can provide you with an idea of the steps needed to correct this issue “No Internet, secured” error:

1. Switch off your VPN
2. Make sure to refresh Windows 10 IP configuration. Windows 10 IP configuration
3. Reset Winsock
4. Verify the connection properties of your PC
5. Disable IPv6
6. Set a New DNS Server
7. Update the driver for the network device
8. Run the Network Troubleshooter in Windows 10

Spend the time to study the steps thoroughly before fixing the No Internet secured issue.

• Disable Your VPN

Are you able to connect your laptop to the Wi-Fi network of your local area only to be greeted at your computer’s “No Internet, secured” error message?

Don’t worry. If you’re using a VPN and using the VPN client’s security features built into the client can trigger this issue. Mainly, it could be the kill switch designed to block you from the Internet if the VPN server fails to function.

If you want to determine whether the issue is with this to determine if this is an issue, turn off the VPN (using its disconnect feature) or shut it down completely. Take a moment to connect to the Internet and test the latest website version, such as an online news website.

If everything is connected, the issue was with the VPN server. Make sure you update your VPN client, if possible first, and afterward connect with a different VPN server. If everything works, it means you’ve fixed the problem!

• Refresh the Windows 10 IP Configuration

Do you use a VPN, but you are still seeing an appearance of a “No Internet, secured” message? Specific commands can assist you in resolving the issue.

Select Right Click Start and then choose Windows PowerShell. In this window, type the following commands, in order:

Ipconfig /release ipconfig/renew

This will cause your system to seek a fresh IP address from the local router. In most cases, this will correct the problem.

• Reset Winsock

Another solution using the command line to fix this “No Internet secured” error is to reset Winsock.

Its name is reminiscent of something you might find in the local airfield; however, Winsock really refers to the Windows Sockets API.

It is a standard that allows your PC to communicate to network service providers, and specifically the well-known TCP/IP.

To reset Winsock to a previous state, you can use the following command:

netsh winlock reset catalog

Give it a few seconds, and if the network does not automatically reconnect, you must do it by hand.

• Check Your PC’s Connection Properties

Still, having trouble? You should check the network adapter on your PC.

1. The settings screen can be opened by clicking the Wi-Fi connectivity icon on the system tray and then Network and Internet Options.
2. Click here to change adaptor options. Right-click on the adaptor you want to connect to and select Properties. Verify that the following items are checked:

• Client for Microsoft Networks
• File and Printer Sharing for Microsoft Networks
• Internet Protocol Version 4 (TCP/IPv4)
• Internet Protocol Version 6 (TCP/IPv6)
• Link-layer Topology Discovery Responder

Select “OK and confirm. If you have made any changes that you wish to undo, restart Windows whenever you are asked to do so.

• Disable IPv6

IPv6 is a network protocol developed to replace IPv4 in the former not having enough IP addresses. While IPv6 is expected to work on most devices, it is prone to error.

You can deactivate IPv6 by repeating the process from the beginning. Just remove Internet Protocol Version 6 (TCP/IPv6), then click OK to confirm the selection. Then restart Your Windows 10 PC when prompted.

• Set a New DNS Server

The Domain Name System (DNS) is similar to the online phonebook; however, it’s automatized and spans worldwide. For instance, if you enter www.makeuseof.com in the browser’s address field, DNS turns your URL to an IP address, directing you to the page you have requested.

But, there are times when it happens that the standard DNS configuration of your system does not work. It’s difficult to tell the source of this “No Internet Secured” error; there is a solution worth exploring.

1. The settings screen can be opened by clicking on the Wi-Fi connection icon on the system tray followed by Network and Internet settings.
2. In this case, click the option to change adaptor settings, right-click the connected device, and select properties.
3. Select Internet Protocol Version 4 (TCP/IPv4) > Properties.
4. Make sure to check. Make use of the following DNS servers and inputs:
5. Preferred DNS Server:9.9.9.9
6. Alternative DNS Server:1.1.1.1
7. Press OK
8. Update Your Network Device Driver

If there’s a possibility that the driver for your network card could be defective, you should consider changing it.

1. Click right-click the Start button and then select Device Manager…
2. In this section, select the Network Adapters, select the device you want to connect to, then right-click and choose update driver.

The device driver updates. Then, restart Windows. If the update is successful, Windows 10 should automatically connect to the network just like it does every day.

If you’re not successful, If this doesn’t work, try disabling the device or rebooting the computer, and then enable the device.

• Run the Network Troubleshooter in Windows 10

In the end, if you’re getting this “No Internet, secured” error message and your computer is still offline, try this.

Windows 10 features several troubleshooting tools and software toolkits which instantly detect and fix errors and perform (or recommend) repairs.

To open the Network Troubleshooter, press Windows key + I to open Settings and then Network and internet then Network Troubleshooter.

Follow the steps by the tool to fix the network connectivity.

Quickly Fix No Internet secured Errors in Windows 10

You should have figured out the issue and reconnected the Windows 10 PC. If you’re not, there’s a good chance the problem is in the network. It is possible to connect to an alternative network and compare the results.

If the issue is on your network, you can restart the router before reconnecting.

Read Next:

• How to Start Your Internet Publishing Business from Scratch
• 5 Important Factors to Consider When Choosing Internet Providers